Author Topic: TLR 22 2wd BUILD couple of washers (missing) needed  (Read 1045 times)

Offline RedFordRob

  • Forum Veteran
  • ***
  • Posts: 224
TLR 22 2wd BUILD couple of washers (missing) needed
« on: November 25, 2016, 05:30:59 PM »
My kit is missing a couple of washers. 
The exploded view on the 22t and 22sct 2.0 show them as part # TLR5096.
Clearly they are not  plastic shock shaft limiters as the parts list describes.

They go on the rear hinge pin in front of the rear pivot ball.
They are a metal washers that have a 3.5mm id and are 0.5 mm thick.
Who's proof reading these manuals
If someone has a couple of spares I could buy or borrow till Horizon makes is right would be appreciated.
No rush I won't be racing it this weekend
Thanks for looking Rob

« Last Edit: November 25, 2016, 06:27:46 PM by RedFordRob »
LOSI TEN SCTE  2.0
LOSI 22SCT 2.0

Offline Bob

  • COR Executive
  • Mud caked
  • *
  • Posts: 1534
Re: TLR 22 2wd BUILD couple of washers (missing) needed
« Reply #1 on: November 25, 2016, 05:45:18 PM »
I should have some,  I've also left them out and used a old shock shaft O ring in its place to take the play out.
TLR 22T, TLR 22SCT, AE B6
TLR 22SCT, Tekno SCT410
XRay 808, XRay XB4 2015,XRay XB4 2018
XRay XB2 2018, AYK Buffalo
STADIUM FOREVER!

Offline Bob

  • COR Executive
  • Mud caked
  • *
  • Posts: 1534
Re: TLR 22 2wd BUILD couple of washers (missing) needed
« Reply #2 on: November 25, 2016, 05:46:56 PM »
They are the same size as shock shaft limiters, just paper thin and in the same bag. Also you need 2 per side
TLR 22T, TLR 22SCT, AE B6
TLR 22SCT, Tekno SCT410
XRay 808, XRay XB4 2015,XRay XB4 2018
XRay XB2 2018, AYK Buffalo
STADIUM FOREVER!

Offline RedFordRob

  • Forum Veteran
  • ***
  • Posts: 224
Re: TLR 22 2wd BUILD couple of washers (missing) needed
« Reply #3 on: November 25, 2016, 06:17:02 PM »
They are the same size as shock shaft limiters, just paper thin and in the same bag. Also you need 2 per side
Oh they put them in a later bag. I will have a look
Thx
LOSI TEN SCTE  2.0
LOSI 22SCT 2.0

Offline RedFordRob

  • Forum Veteran
  • ***
  • Posts: 224
Re: TLR 22 2wd BUILD couple of washers (missing) needed
« Reply #4 on: November 25, 2016, 06:32:35 PM »
They are the same size as shock shaft limiters, just paper thin and in the same bag. Also you need 2 per side
Oh they put them in a later bag. I will have a look
Thx
I looked in the shock bag and there are no extra parts there and nothing that thin.
In the build part of the manual is shows the part # TLR5092 LOL clearly not an upper shock bushing.
If I get impatient I will dig up a couple of o-rings for now
Thanks for tips
LOSI TEN SCTE  2.0
LOSI 22SCT 2.0

Offline Bob

  • COR Executive
  • Mud caked
  • *
  • Posts: 1534
Re: TLR 22 2wd BUILD couple of washers (missing) needed
« Reply #5 on: November 25, 2016, 06:40:11 PM »
I found some and I'll leave them on the race director table for you
TLR 22T, TLR 22SCT, AE B6
TLR 22SCT, Tekno SCT410
XRay 808, XRay XB4 2015,XRay XB4 2018
XRay XB2 2018, AYK Buffalo
STADIUM FOREVER!

Offline RedFordRob

  • Forum Veteran
  • ***
  • Posts: 224
Re: TLR 22 2wd BUILD couple of washers (missing) needed
« Reply #6 on: November 25, 2016, 07:24:47 PM »
I found some and I'll leave them on the race director table for you
Thx see ya Sunday
LOSI TEN SCTE  2.0
LOSI 22SCT 2.0

Offline Bob

  • COR Executive
  • Mud caked
  • *
  • Posts: 1534
Re: TLR 22 2wd BUILD couple of washers (missing) needed
« Reply #7 on: November 26, 2016, 10:27:28 AM »
Your welcome, but I'm going to miss the race. Have fun!
TLR 22T, TLR 22SCT, AE B6
TLR 22SCT, Tekno SCT410
XRay 808, XRay XB4 2015,XRay XB4 2018
XRay XB2 2018, AYK Buffalo
STADIUM FOREVER!